Attune for WindowsAttune Windows 客户端

Before you download

下载前请确认

This unsigned evaluation includes an online EC20 driver assistant, not offline driver binaries or voice models. It downloads from Quectel after your confirmation, checks both SHA-256 hashes and opens the vendor wizard. Internet and administrator approval are required. Windows 11 board, SIM, signal, SMS and two-way call audio still require hardware testing. Do not pay for membership solely to test unverified hardware.

这个未签名评估版已内置 EC20 在线驱动助手，不是离线驱动包，也不含离线语音模型。您确认后，助手从移远官方下载、核对两项 SHA-256，再打开厂商向导；需联网并确认管理员授权。Windows 11 实板、SIM、信号、短信收发及双向通话仍待验收，请勿仅为测试未验证硬件而购买会员。

The driver assistant targets Quectel EC20F / EC20-CE. Bring your own board, SIM and antenna. It is not for Baiwang QDC507, ARM64 or unverified boards. The vendor setup launcher is also unsigned; a checksum is not a signature. Never disable Windows security or driver signature checking. If uncertain, wait for the signed release.

驱动助手针对 Quectel EC20F / EC20-CE，需自备板卡、SIM 和天线。不适用于 Baiwang QDC507、ARM64 或未验证板卡。原厂 setup.exe 外层也未签名，哈希不等于代码签名。不要关闭 Windows 安全防护或驱动签名检查，不确定时请等待已签名正式版。

方便购买：二手 Quectel EC20CEFAG（MINI PCIE）参考约 ¥45（行情会变），见 推荐硬件；需自备天线/转接/供电，兼容范围仍以 EC20F / EC20-CE 为准。

Convenient purchase: second-hand Quectel EC20CEFAG (MINI PCIE) around ¥45 (market price varies). See recommended hardware; bring antenna/adapter/power. Compatibility still targets EC20F / EC20-CE.

Signing status: unsigned. SmartScreen may show “Windows protected your PC”. A trusted signing identity is still required. Do not disable SmartScreen. Microsoft explanation.

签名状态：未签名。SmartScreen 可能显示“Windows 已保护你的电脑”。仍需要配置受信任的代码签名身份；请勿关闭 SmartScreen。微软说明。

0.6.28: during a connected call you can switch between speaking yourself and handing the call back to the AI without hanging up. While you are speaking, the other person hears you and the AI stops talking. Call history keeps the full spoken words. Calls to a saved contact, or to a personal mobile number, use that name and the task for this call. A missing saved COM port is still rebound to a free Quectel AT port, and only the missing card changes. The default mode stays cellular. This build is unsigned, so Setup asks you to confirm; it does not install silently.

0.6.28：通话接通后，可以在「我来说」和「交给 AI」之间切换，不用挂断重拨。你在说的时候，对方听到的是你，AI 会停下来。通话记录保留双方原话。打给通讯录里的人，或打给个人手机号时，会用对方的称呼和这一通要办的事。已经保存的 COM 口如果消失，仍会改绑当前空闲的移远 AT 口，多张卡只更换失效的那张。默认模式仍是蜂窝。此包未签名，安装向导需要您确认，不会静默覆盖。

SHA-256: 417cd983269727f5a509cb9776efeba7fecf9fbb6d6e416f6c29232e5c818434

Compare the downloaded file with this checksum using PowerShell: Get-FileHash .\Attune-Setup-0.6.28-x64.exe -Algorithm SHA256. A checksum checks file integrity; it is not a code signature.

可在 PowerShell 中校验：Get-FileHash .\Attune-Setup-0.6.28-x64.exe -Algorithm SHA256。哈希用于核对文件完整性，不等于代码签名。

后装安卓大屏请下载 Attune 安卓车机 / 手机当前发布版。车机里就是官网现有的注册和登录。

For an aftermarket Android head unit, download the current Attune Android release. It uses the existing website register and sign-in.

Independent cards, one workbench

多卡独立运行，统一工作台

Configure each SIM in Manage cards with its own name, AT port, default mode, optional SOCKS5 proxy and audio device. For example, keep Unicom on cellular and T-Mobile on Wi-Fi Calling at the same time. Switch the selected card when idle; its default is a startup preference and does not lock the mode. A modem is owned by one mode at a time. Local access, website remote management and the tray open the same card-aware workspace.

在「多卡管理」中为每张卡单独设置名称、AT 串口、默认模式、可选 SOCKS5 代理及音频设备。例如联通用蜂窝、T-Mobile 用 VoWiFi 同时运行；空闲时可切换所选卡的模式，默认模式不锁定切换。同一模组每次由一个模式占用，本机、官网远程管理和托盘使用统一选卡工作台。

The selected card controls calls, SMS, recordings, history, AI answering and interpreting settings. Incoming calls can use AI answering or manual pickup. Long incoming SMS segments are reassembled, while each card keeps separate records. Existing primary-card settings and records are retained on upgrade. Card search and 100-card UI behavior have been checked with simulated backends; Windows modem and carrier acceptance remains pending.

选卡后，拨打与接听、短信、录音、通话记录、AI 接听及翻译设置均跟随该卡。来电可选 AI 自动接听或手动接听；长短信接收分段自动重组，各卡记录分别保存。升级保留原主卡配置和记录。已用模拟后端检查 100 卡搜索和切换界面，Windows 实板及运营商通话仍待验收。

Manage your PC from the website

在官网远程管理自己的电脑

Keep the Windows PC online and Attune running. Sign in locally and leave website remote management enabled. Sign in with the same account on the website, then open My workspace → My devices → Manage remotely. You can use another network; no port forwarding is required. Choose English or Chinese when installing.

Windows 电脑保持开机、联网并运行 Attune。在本机登录，保持「官网远程管理」开启；再在官网登录同一账户，进入「我的工作台 → 我的设备 → 远程管理」。无需同一局域网，无需端口映射；安装时可以选择简体中文或 English。

This client can install a newer official EXE from the website after checking SHA-256. Use Install latest on the local Attune page or on My devices. Google contacts are a second optional authorization after sign-in, then Sync on the PC.

本机可在校验 SHA-256 后从官网安装新的 EXE。本地 Attune 页或官网「我的设备」都有「安装官网最新版」。Google 通讯录是登录后的可选授权，再在电脑上同步。

Select a PC, then select a card to manage its calls, SMS, settings, history and recordings. Model keys and records stay on the PC; requested settings, messages, recordings and live audio are temporarily relayed through the website over encrypted connections. The PC must remain online. You can disable remote access locally or remove the device from the website.

先选择电脑，再选择电话卡，管理该卡的通话、短信、配置、历史和录音。模型 Key 和记录保存在电脑；远程设置、短信、录音和实时音频通过加密连接在官网临时转发。电脑必须在线，可以在本机关闭远程管理或在官网移除设备。

Model and API key changes apply to subsequent calls without restarting Attune. Saving the card list requires every card to be idle and reconnects the affected card services.

模型和 API Key 等修改在后续通话生效，无需重启 Attune。保存多卡硬件配置需要所有卡空闲，并会重新连接线路服务。

Remote access uses the current website service with the 0.6.28 client. A PC already on 0.6.26 can sign in, then use Install latest on the local Attune page or on My devices. Because this installer is unsigned, Setup opens for confirmation instead of installing silently. You can also download it from this page. Real Windows 11 board and cross-network audio acceptance is still pending.

远程管理使用当前官网服务与 0.6.28 客户端。已经安装 0.6.26 的电脑，登录后可在本机 Attune 页面或官网「我的设备」点「安装官网最新版」。此安装包未签名，会打开安装向导请您确认，不会静默安装。也可以在本页直接下载。真实 Windows 11 开发板与异地双向音频仍待验收。

Send SMS from your board

使用自己的开发板发送短信

After signing in with valid membership or trial access, open SMS in the local or remote device console. Enter a new recipient or select a number from message history. Review the recipient, text and carrier charge notice before confirming. SMS does not require a model key.

登录并取得有效会员或试用权限后，在本机或官网远程工作台打开「短信」。可以输入新收件号码，也可以从短信记录选号码回复；核对号码、内容和运营商收费提示后再确认发送。发送短信不需要模型 Key。

One SMS supports up to 160 GSM-7 or 70 Unicode units; extensions and some emoji count as two. Long messages are rejected, not silently split into multiple paid messages. “Submitted” is not handset delivery. If the result is unknown, check with the recipient before resending. Confirmation may take about two minutes; manual sending is blocked during an existing call.

单条最多 160 个 GSM-7 或 70 个 Unicode 编码单位，扩展符号和部分表情占两位。超长内容会被拒绝，不自动拆成多条收费短信。「已提交网络」不代表对方已收到；结果未确认时先核实收件情况，不要立即重发。网络确认可能需要约两分钟，已有通话时禁止手动发送。

Finish any calls before upgrading. Setup now closes the old Attune background application before replacing files, keeps your profiles and records, and skips driver installation on upgrades. If an older installer reports error 32 for base_library.zip, choose Exit in the local Attune page, then Retry in Setup; do not skip the file.

升级前请先结束通话。新版安装器会自动退出旧版 Attune 后台，再替换程序，保留账户配置和记录，升级时不重复安装 USB 驱动。旧安装器若提示 base_library.zip 或错误 32，请先在本地页面点“退出软件”，再点安装器的“重试”，不要跳过文件。

Install, prepare, then start

先安装准备，再开始试用

1. Run the installer on your Windows x64 PC and choose English or Chinese. No Python, Node or Docker installation is needed.
2. For a first installation, select the EC20 driver task if needed. Upgrades skip this task. Confirm the source, complete the vendor wizard and restart if requested. You can retry from Start > Attune USB Driver Setup after closing Attune. Then open Attune, connect your board and check devices in the local browser client.
3. Sign in with your website email and password. Save your language and model key. Direct human calls do not require a model key.
4. Administrator-granted or paid members need no second purchase. Eligible verified new accounts can explicitly start one 7-day membership trial after preparation. Setup does not consume it.

1. 在 Windows x64 电脑运行安装程序，先选择简体中文或 English，不需要另外安装 Python、Node 或 Docker。
2. 首次安装且需要驱动时勾选 EC20 驱动任务；升级会跳过此项。确认来源、完成厂商向导并按需重启。关闭 Attune 后可从开始菜单“Attune USB Driver Setup”重试。随后打开 Attune，连接板卡，在本机网页检测设备。
3. 用官网相同邮箱和密码登录，保存语言及模型 Key。真人直拨不需要模型 Key。
4. 管理员授权或付费会员无需重复购买。符合条件的已验证新账户，准备完成后主动开启一次 7 天会员试用；设置阶段不计时。

At trial expiry, calling stops and subscription is offered; your settings and records remain. Model API usage, SIM charges and hardware are separate. Calling requires online entitlement checks. To manage this PC from another network, use My workspace → My devices and select this computer.

试用到期停止通话并提示订阅，保留设置和记录。模型 API、SIM 话费和硬件费用另计；通话需联网验证权限。异地管理请进入官网「我的工作台 → 我的设备」，选择这台电脑。

What has been checked

已经检查了什么

0.6.28 keeps the 0.6.26 evaluation, including COM rebinding, and adds in-call switching between you and the AI, full transcripts, and personal-call wording. The bundled import self-test passed. Optional offline speech models are not included. It is unsigned. Windows installer smoke, the online-driver suite, and real-board acceptance were not repeated for this build. The Wi-Fi Calling companion is the previously published component and still includes its GPL source. No real call or SMS was placed for this package.

0.6.28 在 0.6.26 评估版上保留 COM 口失效后的自动重绑，并增加通话中真人与 AI 切换、完整原话，以及打给个人时按称呼和事项说话。包内导入自检已通过。不含可选的离线语音模型。安装包未签名。这次没有在 Windows 上重跑安装器冒烟和在线驱动全套检查，也还没有实板验收。VoWiFi 伴侣仍是先前已发布的同一组件，并附带 GPL 源码。这次打包没有拨打电话，也没有发送真实短信。

Bundled import self-test包内导入自检 · Current release manifest当前发行清单

Desktop corresponding source电脑版对应源码 · VoWiFi component and GPL sourceVoWiFi 组件及 GPL 源码

Android can reuse the account and entitlement API, but no customer Android app is released. For support, provide the Attune version, board and driver model, and error message. Review logs for phone numbers, dialogue and credentials before sharing.

安卓可复用账户与授权接口，但尚未交付客户安卓 App。联系支持时请提供 Attune 版本、板卡及驱动型号、错误提示；分享日志前检查其中的号码、对话及凭据。